Solar Panel Voc & MPPT Compatibility Checker

Check whether a solar array is safe to connect to your power station before you wire it. Enter the panel’s datasheet values, how the panels are wired, and the coldest temperature you expect. The checker raises the array voltage for cold weather and compares it with the station’s input limits.

From the panel’s label or datasheet.
Series wiring adds voltage.
Parallel wiring adds current.
= 32 °F
−0.3 is typical. Use your panel’s datasheet value if listed.
Total array Voc at 25 °C
–
Cold-weather adjusted max Voc
–
Total array current (Isc)
–

Below 25 °C, Voc rises by the coefficient for every degree of cold. Above 25 °C the checker keeps the 25 °C value as a safe upper bound. Many controllers simply limit current above their rating, but voltage over the limit can permanently damage the input.

Why cold weather raises panel voltage

Solar cells produce a higher voltage when they are cold. A panel’s open-circuit voltage (Voc) is rated at 25 °C, and for typical crystalline silicon panels it climbs about 0.3% for every degree below that. On a freezing, sunny morning, before any load is connected, a series string can exceed its rated Voc by 7% or more. That brief peak is what can push a power station’s solar input past its maximum voltage.

The formulas

Array Voc at 25 °C = Panel Voc × Panels in series
Cold-adjusted Voc = Array Voc × [1 + (|coefficient| ÷ 100) × (25 − lowest temperature)]
Array current = Panel Isc × Parallel strings

Example: two 21.6 V panels in series give 43.2 V at 25 °C. At 0 °C the adjustment is 25 × 0.3% = 7.5%, so the string can reach about 46.4 V. That is safely under a 60 V input limit.

Voltage limits are hard, current limits are usually soft

As a general rule, an MPPT controller can limit how much current it draws, but it cannot refuse voltage. That is why the checker marks voltage over the limit as DANGER and current over the rating as CHECK. Always confirm both limits in your power station’s user manual. Our Editorial Methodology explains how we cross-reference Voc and Isc against each station’s MPPT window.

More tools: Solar Charging Time & Array Sizing Calculator · Power Station Runtime Calculator · all Sizing & Calculators