Estimate how long a solar array takes to refill your power station. Enter the battery capacity, its current charge, your panel wattage, and the station’s maximum solar (MPPT) input. The calculator flags clipping when the array delivers more than the station can accept.
- Energy needed
- –
- Effective solar input
- –
- Estimated recharge time
- –
Recharge time is counted in hours of direct sun at the effective input. Panels produce less in the early morning and late afternoon, so a full day usually adds up to 4–6 peak-sun hours depending on location and season. The result also leaves out the station’s own charging losses.
How the calculation works
Energy needed (Wh) = Capacity × (100% − Current charge)
Effective solar input (W) = Panel wattage × Derating factor, capped at the MPPT limit
Recharge time (hours) = Energy needed ÷ Effective solar input
Example: a 1,024 Wh station at 20% needs 819 Wh. A 200 W array at 75% delivers about 150 W, so the refill takes roughly 5 hours 28 minutes of direct sun.
Why panels rarely hit their rated wattage
Panel wattage is rated under Standard Test Conditions (STC): 1,000 W/m² of sunlight at a cell temperature of 25 °C. Outdoors, panels run hotter, the sun is rarely straight overhead, and dust, cable runs, and controller conversion all trim output. As a general rule, 75% of the rated wattage is a realistic figure for a well-aimed panel under a clear sky. Flat-mounted or partly shaded panels often land closer to 60%.
What MPPT clipping means
Every power station caps the solar power it accepts. When the array can produce more than that cap, the MPPT controller limits the intake and the extra watts go unused. Some oversizing helps in winter and on cloudy days, but the array’s voltage must always stay below the station’s maximum input voltage. Check your array with the Solar Panel Voc & MPPT Compatibility Checker before connecting it. Our Editorial Methodology explains how we source MPPT limits from manufacturer manuals.
More tools: Power Station Runtime Calculator · all Sizing & Calculators